Flow Measurement
Showing 121–144 of 230 results
-
Flow Measurement
LZZW Series Miniature Metal Tube Variable Area Rotameter
ViewThe flowmeter operates on the flout measuring principle. The measuring section consists of a metal cone in which a flout can move freely up and down. The mudium flows through the flowmeter from bottom to top.The variable area flowmeters are suitable for measuring gases, vapors and liquids with specialty of solid, steady and reliable. The flowmeter are available as inlet or outlet pressure regulator. It also select install 1 or 2 limit switches. -
Flow Measurement
LZZX Series Low Flow Micro Flowrate Metal Tube High Pressure R888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888888otameter
ViewUsed for the measurement of micro flowrate of liquids and gases. All-metal structure, With the characteristics of small volume, low pressure loss, etc, Widely used in various industries which is complex and harsh environment.Measure and process control for micro flowrate, low flow rates, various harsh media conditions. Especially suitable for measuring turbid, opaque or corrosive fluids -
Doppler Flow Meter
MantaRay
ViewPortable Area Velocity Flow MeterThe MantaRay is a portable area velocity meter that measures flow using a submersible ultrasonic sensor. The unit is designed for flow surveys in open channels, partially-full sewer pipes, and surcharged pipes – making the portable open channel flow meter suitable for sewer monitoring, industrial flow monitoring, irrigation flow, and natural streams.Easy to UseThe MantaRay Portable Area-Velocity Flow Meter measures both level and velocity to calculate flow in an open channel or pipe. Calibration is simple: enter the pipe diameter or channel dimensions and the MantaRay automatically computes and displays the flow rate and total on its backlit LCD display.The ultrasonic sensor mounts inside the pipe or on the bottom of a channel with a stainless-steel mounting bracket (included) and a single screw into the bottom of the pipe or channel. No special compounds, tools, or hardware are required. The sensor is completely sealed with no orifices or ports, making it resistant to build-up and fouling. -
Flow Measurement
MDot™
ViewThe MDot™ is one of the most technically advanced gas flow meters specifically designed for water and wastewater. An innovative Thermal Mass Flow Meter and Temperature Transmitter that operates on the law that gases absorb heat. Specifically developed for the demands of the water and wastewater industry, where aeration, digestion, and cogeneration play crucial roles.Use the Pulsar Measurement MDot™ to successfully measure air, methane (natural gas), and methane/CO2 mixes (digester and biogas). Microprocessor-based and field programmable, the MDot™ features two sensor elements, with one sensor element detecting the gas temperature and the second maintained at a constant temperature above the gas temperature. When gas flows past the sensor, the energy required to maintain the constant differential temperature as heat is siphoned into the gas is proportional to the mass flow rate. -
Differential Pressure
MEF
ViewEMCO Orifice Plate Series MEF with Single Pressure Tapping for Insertion Between FlangesThe EMCO Orifice Plate is used as a primary element in flow measurement of liquid, gas and steam applications based on the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction in the pipeline to allow measurement of the resulting pressure drop and flow rate.The Orifice Plate Series MEF is constructed with a single pressure tapping for insertion between flanges. -
Differential Pressure
MEF/2
ViewEMCO Orifice Plate Series MEF/2 with Single Pressure Tapping for Insertion between RTJ FlangesThe EMCO Orifice Plate is used as a primary element in flow measurement of liquid, gas and steam applications based on the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction in the pipeline to allow measurement of the resulting pressure drop and flow rate.The Orifice Plate Series MEF/2 is constructed with a single pressure tapping for insertion between ring type joint (RTJ) flanges. -
Differential Pressure
MES
ViewEMCO Orifice Plate Series MES with Single Pressure Tapping in All Welded ConstructionThe EMCO Orifice Plate is used as a primary element in flow measurement of liquid, gas and steam applications based on the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction in the pipeline to allow measurement of the resulting pressure drop and flow rate. Our orifice plates have been tested and tried for over 50 years and measure up to the highest industry and compliance standards.The Orifice Plate Series MES is constructed with a single pressure tapping in all welded construction -
Flow Sensor
MicroFlow
ViewNon-contacting Velocity MeasurementMicroFlow provides a non-contacting, velocity measurement solution for open channels. Use MicroFlow as a stand-alone device for simple velocity measurement or pair it with a dB Ultrasonic Transducer for a complete area-velocity system.Area-velocity calculations using MicroFlow provide a cost-effective flow measurement solution compared to the installation of a Primary Measuring Device (PMD). Additionally, the hydraulics of a site can sometimes not allow for restriction within the channel, therefore it would be unsuitable for a PMD to be installed, the MicroFlow provides a viable solution. -
Flow Measurement
MicroFlow-i
ViewNon-Contacting Velocity MeasurementThe MicroFlow-i is a non-contacting velocity measurement solution. Its extremely low power makes it an ideal velocity measurement solution for remote sewer network access points that are difficult to reach and often have no main power supply. Its lightweight, compact design makes installation simple, especially within confined spaces, and requires no interruption to normal operational flow. -
Flow Measurement
MINISONIC P
ViewThe MINISONIC P & P-B flowmeters are THE new portable metering tools.New measurement technology 'ESC' (or Echo Shape Control), this is an automatic function, essentially an ultrasonic auto-focus, which offers the warranty of quick, sure and accurate flow measurement. The dual pipe version can calculate, display and transmit a QT flow value equal to the sum or the difference of the two flows that device measures on two independent pipes. It is possible to install the two set of transducers on a same pipe and closed to each other to improve the measurement reliability or better at two different locations and do a line balance or a leak detection. -
Differential Pressure
MRK
ViewEMCO Orifice Plate Series MRK with Carrier Rings and Corner Pressure Tappings for Insertion Between FlangesThe EMCO Orifice Plate is used as a primary element in flow measurement of liquid, gas and steam applications based on the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction in the pipeline to allow measurement of the resulting pressure drop and flow rate.The Orifice Plate Series MRK is constructed with carrier rings and corner pressure tappings for insertion between flanges. -
Electromagnetic Flow Meter
MS1000
ViewWafer sensor for electromagnetic flow meterThe MS 1000 wafer sensor is easy to assemble thanks to the absence of flanges, it is installed by inserting it between various types of counter flanges (UNI, DIN, ANSI, JIS etc.).It is suitable for all main applications, particularly in the water market, HVAC and cooling systems.Electromagnetic Flow Meter MS1000 Wafer Sensor จาก ISOIL สำหรับวัดอัตราการไหลของน้ำและของเหลวนำไฟฟ้า ให้ค่าการวัดแม่นยำ ติดตั้งง่าย รองรับการใช้งานในโรงงานอุตสาหกรรม ระบบน้ำ และระบบบำบัดน้ำเสีย -
Electromagnetic Flow Meter
MS2410
ViewSanitary sensor for electromagnetic flow meterThe MS 2410 sanitary sensor ISOMAG for electromagnetic flow meters is specific for use in food or pharmaceutical plants.It is resistant to vacuum (200 mbar absolute at a temperature of 100 ° C), ideal for CIP cycles, 3A and FDA certified.ISOIL Industria offers a wide choice for process connections and electrode material. -
Electromagnetic Flow Meter
MS2420
ViewSanitary sensor for electromagnetic flow meterThe MS 2420 sanitary sensor ISOMAG for electromagnetic flow meters, with a design that allows the disassembling of the connections for inspection or replacement of gaskets is specific for use in food or pharmaceutical plants.It is resistant to vacuum (200 mbar absolute at a temperature of 100 ° C), ideal for CIP cycles, 3A and FDA certified.Electromagnetic Flow Meter ISOIL MS2420 เซ็นเซอร์สุขอนามัยสำหรับวัดการไหลของของเหลวในอุตสาหกรรมอาหาร เครื่องดื่ม และเภสัชกรรม รองรับ Tri-Clamp, CIP, มาตรฐาน FDA และ 3A พร้อมความแม่นยำสูง -
Electromagnetic Flow Meter
MS3780
ViewInsertion sensor for electromagnetic flow meterThe MS 3780 insertion sensor for electromagnetic flow meters is used for mounting in depressurized lines and with diameters from 80 to 2,000 mm.It is ideal for line monitoring and HVAC applications.ISOIL Industria offers a wide choice of sizes for diameter pipes.Electromagnetic Flow Meter MS3780 จาก ISOIL เซ็นเซอร์วัดอัตราการไหลแบบ Insertion สำหรับของเหลวนำไฟฟ้า เหมาะกับงานระบบน้ำ ระบบ HVAC และงานอุตสาหกรรม รองรับท่อขนาดใหญ่ ติดตั้งสะดวก พร้อมความแม่นยำในการวัดสูง -
Electromagnetic Flow Meter
MS3810
ViewElectromagnetic insertion sensorThe MS3810 insertion sensor ISOMAG is used for mounting on pressure lines with diameters from 80 to 8000 mm and it is ideal for temporary measurement campaigns, line monitoring and leak detection.Wide choice of sensor lengths for installation in pipes of different diameters with the possibility of integrating pressure measurement.ISOMAG MS3810 Insertion Type Electromagnetic Flow Meter จาก ISOIL เครื่องวัดอัตราการไหลแบบสอดแทรก (Insertion) สำหรับท่อขนาดใหญ่ ติดตั้งได้โดยไม่ต้องหยุดระบบ เหมาะสำหรับงานตรวจสอบการไหล ตรวจจับการรั่วไหล และระบบน้ำอุตสาหกรรม ให้ค่าการวัดแม่นยำและเชื่อถือได้ -
Electromagnetic Flow Meter
MS5000 CIAO
ViewPlastic sensor for electromagnetic flow meterThe plastic sensor for electromagnetic flow meters MS5000 CIAO, has a patented attachment and tightening by means of metal clamps, which makes it ideal in all applications where volumetric meters are normally used, with all the advantages of the electromagnetic meter.ISOIL Industria offers a wide choice of materials for electrodes.Electromagnetic Flow Meter Sensor ISOMAG CIAO MS5000 เซ็นเซอร์พลาสติกสำหรับวัดอัตราการไหลของน้ำและของเหลวนำไฟฟ้า ขนาด DN25–DN80 ติดตั้งรวดเร็ว แม่นยำ และช่วยลดต้นทุนการบำรุงรักษาในงานอุตสาหกรรม -
Electromagnetic Flow Meter
MS600
ViewMicroflow sensor for magnetic flow meterThe MS 600 ISOMAG microflow sensor has a wide range of applicability thanks to the variety of its attachments.Electromagnetic Flow Meter MS600 จาก ISOIL เซ็นเซอร์ Microflow แบบ Polypropylene สำหรับวัดอัตราการไหลของของเหลวนำไฟฟ้า ให้ความแม่นยำสูง ทนการกัดกร่อน ติดตั้งง่าย เหมาะสำหรับงานน้ำ เคมี และระบบอุตสาหกรรม -
Differential Pressure
MSRF & MSRS
ViewEMCO Meter Run Series MSRS and MSRF with Carrier Rings and Corner Pressure TappingsThe EMCO Meter Run is used as a primary element in flow measurement of liquid, gas and steam applications based on the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction within the meter run to allow measurement of the resulting pressure drop and flow rate. Our orifice plates have been tested and tried for over 50 years and measure up to the highest industry and compliance standards.The Meter Run Series MSRS and MSRF combine the orifice plate with a straight pipe run ro enhance the flow profile. The construction includes carrier rings and corner pressure tappings. -
Flow Transmitter
Multirange and differential pressure transmitter
ViewJUMO Multirange and Differential Pressure Transmitter เครื่องวัดความดันแตกต่างสำหรับก๊าซที่ไม่กัดกร่อน ปรับช่วงการวัดได้ 2.5–100 mbar พร้อมเอาต์พุต 4–20 mA และ 0–10 V เหมาะสำหรับระบบ Cleanroom และงานอุตสาหกรรม -
Accessories
MV110
ViewConverter with display for magnetic flow meterThe MV110 converter is mainly used in the water market, in HVAC and in industrial applications where performance and outputs or basic protocols are required.It offers the possibility to program it via the keyboard on the front or via a PC with a mini USB adapter, and can be coupled to the flanged sensors or wafers of the ISOMAG line.ISOIL ISOMAG MV110 Converter คอนเวอร์เตอร์สำหรับเครื่องวัดอัตราการไหลแบบแม่เหล็กไฟฟ้า (Electromagnetic Flow Meter) พร้อมจอ LCD Backlight รองรับ HART, Modbus, RS485 และ Data Logger เหมาะสำหรับงานน้ำ น้ำเสีย HVAC และโรงงานอุตสาหกรรม -
Accessories
MV210
ViewMV210Converter for electromagnetic flow meterThe MV210 is the high-performance converter for electromagnetic flow meters of the ISOMAG line.It is designed for all those applications that require the highest accuracy and can be coupled to all the full bore or insertion sensors of the ISOMAG line.It is programmable via keyboard on the front or via PC with mini USB adapter.Available functions:low flow cutbidirectional measurementpeak cutting, empty pipe, alarm limit etc.Available accessories:rechargeable backup battery (guarantees measurement in the absence of power)4 GB data logger, Built-In Verifier (BIV) to evaluate the electrical characteristics of the sensor and converter over time.Product AttachmentsBROCHURE | DATASHEET
