Flow Measurement
Showing 25–48 of 230 results
-
Electromagnetic Flow Meter
AMF301
Read moreElectromagnetic Magnetic Flow MeterThe AMF301 Series is a threaded-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 4 to 40 mm.The AMF301 is widely used for tap water, waste water, food & beverage, pulp & paper and many other industrial fluids.AMF301 Series electromagnetic flowmeter can be used in compact or remote model with AMC Series converter of electromagnetic flowmeter. -
Electromagnetic Flow Meter
AMF500
Read moreElectromagnetic Flow MeterThe AMF500 Series is a wafer-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 50 to 200 mm.AMF500 is widely used for tap water, waste water, food & beverage, pulp & paper, and many other industrial fluids.AMF500 Series electromagnetic flowmeter can be used in a compact or remote model with AMC Series converter of the electromagneticflowmeter. -
Flow Measurement
ASF7100 Series
Read moreThe ASF7100 Series Swirl Flowmeter is a gas flow meter that combines turbine & vortex flow measurement technologies to provide a reliable, high-accuracy, robust, maintenance-free flow meter. The turbine-shaped flow inlet causes the process flow to rotate causing a vortex core to form & a subsequent secondary rotation causes thread-like spirals to be formed. These resulting secondary pressure frequencies are linear & proportional & are measured by dual piezo-electric sensors. The resulting measurements are processed & pressure & temperature compensated and then converted to the flow measurement display. ASF7100 Series Swirl Flowmeter can be widely used in petroleum, chemical, electricity, metallurgy, coal and other industries. -
Flow Measurement
ATF2000 Series
Read moreMass Flow meterATF2000 Series thermal mass flow meter is designed on the basis of thermal dispersion. It adopts method of constant differential temperature to measuring gas flow. It has the advantages of small size, high digitization, easy installation and high accuracy.ATF2000 is a multi-functional thermal mass flow meter that measures mass flow and volume flow. With insertion-type connection, the meter can achieve a hot-tapped installation and maintenance. -
Flow Measurement
AVF250 Series
Read moreThe AVF250 Series flowmeter is commonly used in locations that require on-site analog flow indications. The meter accurately measures small volumes / wide ranges of liquids, gases and steam. -
Flow Measurement
AVF250S Series
Read moreThe AVF250S series is a Micro float flowmeter developed by ALIA, with a simple structure and easy installation, which is very suitable for the measurement of small flowrate of gas or liquid. The design of the trimming needle valve makes it convenient to adjust the flowrate. Combined with the flow regulator, the flow purge device is formed to achieve constant flowrate output. The AVF250S is widely used in petrochemical, oil refining, fertilizer, steel, medicine and other industries. -
Flow Measurement
AVF7000 Series
Read moreSeries Vortex flow meterAVF7000 Series เป็นเครื่องวัดอัตราการไหลแบบ Vortex ที่ทำงานตามทฤษฎีของ Von Karman ซึ่งอธิบายการเกิดกระแสวน (Vortices) จากแท่งกีดขวาง (Bluff Body) ภายในท่อ โดยหลักการนี้ทำให้ จำนวนกระแสวนที่เกิดขึ้นมีความสัมพันธ์เชิงเส้นโดยตรงกับอัตราการไหลเชิงปริมาตรภายในท่อ ดังนั้น จึงสามารถวัดค่าได้อย่างแม่นยำและเสถียรนอกจากนี้ AVF7000 ยังเป็นเครื่องวัดอัตราการไหลที่ใช้งานได้หลากหลาย ไม่ว่าจะเป็น ก๊าซ ไอน้ำ หรือของเหลว จึงเหมาะสำหรับ งานอุตสาหกรรมหลายประเภทอีกทั้ง ตัวเครื่องไม่มีชิ้นส่วนที่เคลื่อนไหว (No Moving Parts) ส่งผลให้ ลดการสึกหรอและค่าบำรุงรักษาในระยะยาว ขณะเดียวกัน ยังมีให้เลือกทั้งแบบหน้าแปลน (Flange Connection) และแบบ Wafer เพื่อให้เหมาะสมกับ ลักษณะการติดตั้งที่แตกต่างกัน -
Converter
AVFM 6.1
Read moreArea Velocity Flow MeterThe Area Velocity Flow Measurement method is the most common method of all flow measurements. The AVFM 6.1 Area Velocity Flow Meter uses a submersible ultrasonic sensor measuring both the level and velocity of flowing liquid to calculate flow measurement in an open channel or pipe. The sensors are mounted either inside a pipe or at the bottom of a channel, and the sensor is built to resist fouling, corrosion, and abrasion. The AVFM 6.1 Area Velocity Flow Meter can be configured with the standard submerged velocity-level sensor or with submerged velocity in combination with a separate non-contacting ultrasonic level sensor, which is suitable for highly aerated fluids or those with a high concentration of suspended solids. -
Flow Measurement
dB Ultrasonic Transducer
Read moreNon-contacting Ultrasonic TransducerThe dB Transducer series from Pulsar Measurement is a range of level sensors for wastewater and industrial environments. Ranging from 3 m (9.8 ft) to 40 m (131.2 ft) all of our ultrasonic level sensors provide a reliable level, volume, open channel flow, pump control, and differential level measurement for both liquid and solid applications. -
Flow Measurement
dBMACH3
Read moreSpecialist Ultrasonic Flow TransducerFeaturing unique sun and submergence shields, the dBMACH3 is designed specifically for open channel flow applications. dBMACH3 is the first ultrasonic transducer with zero effective blanking distance beyond the nose cone, allowing it to be sited at little as a few millimeters from the high-flow level. One of the critical factors affecting the ultrasonic accuracy is the measurement distance, so by minimizing the distance, accuracy is maximized. -
Flow Sensor
dBR Radar Transducer
Read moreThe dBR radar series of transducers from Pulsar Measurement is a range of Radar level sensors that are ideal for difficult applications such as high temperatures, applications subject to foam or atmospheric changes, or applications with harsh chemicals that give off vapors. -
Doppler Flow Meter
DFS 5.1
Read moreDoppler Flow SwitchFlow switches are particularly useful for pump protection or to activate flow or no-flow alarms. The DFS 5.1 Doppler Flow Switch is designed to give basic process control for pipe flow measurement, recommended for difficult liquids including wastewater, cooling water, slurries, sludge, chemicals, viscous liquids, and abrasives that would usually damage contacting Doppler flow switches. The non-contacting ultrasonic sensor mounts to the outside of metal or plastic pipes, without the need to cut the pipe or shut down the flow of your process, increasing your efficiency and ultimate profitability. With no maintenance required for the Doppler flow switch, it works on any pipe diameter 12.5 mm (0.5 in) or larger and installs in just minutes.The relays in the DFS 5.1 can be set to turn ON and OFF at any flow rate between 0.075 m/s to 3 m/s (0.25 ft/s and 9.8 ft/s) in addition, the end-user could inset two links for separate ON/OFF set points or just one link for a high or low flow alarm. -
Accessories
F014 – with pulse output
Read moreThe F014 is a local flow rate indicator / totalizer which displays the actual flow rate, total and accumulated total. A scaled pulse, related to the accumulated total is generated for re-transmitting the count on the display. Total can be reset to zero by pressing the CLEAR button twice. The accumulated total can register up to 11 digits and is backed-up in EEPROM memory every minute, just as the running total.On-screen engineering units are easily configured from a comprehensive selection. -
Accessories
F103 – with analog and pulse output
Read moreThe versatile F103 flow rate indicator / totalizer is your best choice for flow monitoring applications. It is perfect for new installations and to replace existing flow analyzers in the field. Its rugged construction, unique plug-and-play design and attractive pricing makes the F103 the perfect flow logger for liquid and gas flow measurement in Class I, Division 2 hazardous areas. It is the first F-Series with flow logging besides the various pulse and analog output signals. Even demanding applications are catered for with our base unit configuration.The display shows flow rate and totals. A current day total (daily total) and 15 historical (previous) day totals can be enabled in the setup menu to be shown at the main display. On-screen engineering units can easily be configured from a comprehensive menu. The flow/data logging is optional available and when chosen, it replaces the basic 15 historical (previous) day totals. Each log contains the flow rate, total, acc. total, time stamp and log number. The log can be downloaded as .csv file with the free software tool. -
Accessories
F110 – with modbus, analog and pulse output
Read moreThe F110 flow rate indicator / totalizer is the most popular model in our range of flow rate indicator / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration. Displays total and flow rate simultaneously and additional accumulated total. On-screen engineering units are easily configured from a comprehensive selection. -
Flow Measurement
F56/P10A VA Flow meter
Read moreVariable Flow MeterTransmitter with Local LCD Indicator is designed on the basis of PCB multifunction flow, the signal measured is converted to flow value by magnetic coupling. The value is both shown by the pointer on thescale plate and on LCD. -
Flow Measurement
F56/P8L
Read moreVariable FlowmeterTransmitter with Local LCD Indicator is designed on the basis of PCB multifunction flow, the signal measured is converted to flow value by magnetic coupling. The value is both shown by the pointer on thescale plate and on LCD.P8 Mechanical indicator:Stainless steel housing, punch forming, surface polished.Flow read by local mechanical pointerCompact and beautiful structure. -
Coriolis Flow Meter
FCC-300
Read moreเครื่องวัดอัตราการไหลของมวล Coriolis FCC-300เครื่องวัดอัตราการไหล ของมวล Coriolis เป็นเครื่องมือวัดอัตราการไหลชนิดใหม่ที่พัฒนาขึ้นตามหลักการของแรง Coriolis สามารถวัดอัตราการไหลของมวลของของไหลในท่อปิด ความหนาแน่นของตัวกลาง และอุณหภูมิได้โดยตรง สามารถใช้กันอย่างแพร่หลายในอุตสาหกรรมเคมี ปิโตรเลียม อาหาร ยา การทำกระดาษ และอุตสาหกรรมอื่นๆมาตรฐานการใช้งานของผลิตภัณฑ์นี้คือ GB/T 31130-2014 Coriolis mass Flow Meter -
Accessories
FlowCERT
Read moreNon-contacting Area Velocity Flow MonitorPulsar Measurement’s FlowCERT provides comprehensive open channel flow measurement with extensive data logging and control functions. It includes a range of pre-programmed flumes and weirs, so setup is quick, simple, and straightforward. The unit is compatible with a range of both contacting and non-contacting sensors and has the flexibility to change with your application. -
Doppler Flow Meter
FlowPulse Handheld Controller
Read morePortable Pipe Flow MonitoringThis HandHeld portable unit from Pulsar Measurement is designed for use with the FlowPulse pipe flow sensor, providing portable pipe flow monitoring and offering a toolset that allows programming of the non-contacting pipe flow sensor, monitoring, and data acquisition. The HandHeld controller connects to the pre-installed FlowPulse sensor or can operate as a self-contained kit, giving instant feedback on pipe flow via its color screen.The FlowPulse HandHeld controller is available as a stand-alone unit to use with existing FlowPulse sensors or can be purchased as a complete kit with a convenient carry case. The portable non-contacting, clamp-on, pipe flow monitoring system allows the operator to view traces and recorded data files - as well as loading and saving parameter files.Use the portable pipe flow monitoring system to complete system checks, monitor asset performance, or validate inline flow meter readings. Suitable for pump performance monitoring, industrial flow, irrigation flow, food and beverage manufacturers, pharmaceutical manufacturers, and much more!
