Flow Measurement
Showing 73–96 of 230 results
-
Flow Measurement
G2S20NQ9GMB 2″
Read more2″ NPT Female 316SSRate & Totals G2 Series – INDUSTRIAL GRADE METERMain SpecificationsConnection Size: 2″Connection Type: NPT FemaleFlow Range: 20 – 200 GPM (76 – 760 LPM)Pressure Rating: 1500 PSI (102 Bar)Operating Temp With Local Computer:0 to 140°F (-18 to 60°C) for SAFE AREA (Non-FM Approved)0 to 129°F (-18 to 54°C) for INTRINSICALLY SAFE (FM Approved) -
Flow Measurement
G2S20TQ9GMB (2-1/2″)
Read more2-1/2″ (2″ Meter Body Size) Tri-Clamp 316SSRate & Totals G2 Series – INDUSTRIAL GRADE METERMain SpecificationsConnection Type: Tri-ClampFlow Range: 20 – 200 GPM (76 – 760 LPM)Pressure Rating: 150 PSI (10.2 Bar)Connection Size: 2-1/2″ (2″ Meter Body Size)Operating Temp With Local Computer:0 to 140°F (-18 to 60°C) for SAFE AREA (Non-FM Approved)0 to 129°F (-18 to 54°C) for INTRINSICALLY SAFE (FM Approved) -
Flow Measurement
H250 M40
Read moreVariable area flowmeter for liquids and gasesModular design: from mechanical indicator to 4…20 mA/HART®7, FF, Profibus-PA and totalizerAny installation position: vertical, horizontal or in descending pipesFlange: DN15…150 / ½…6"; also NPT, G, hygienic connections, etc.-196…+400°C / -320…+752°F; max. 1000 barg / 14500 psig -
Flow Measurement
High Temperature
Read moreLZ series variable-area flow meter with metallic tube has the characteristics of simplicity, reliability wide application field, high precision and easy installation. -
Flow Measurement
IFX-A
Read moreUltrasonic flow meter IFX-A ISOFLUXThe ISOFLUX IFX-A ultrasonic flow meter is suitable for applications on clean water and low conductivity liquids.It belongs to a complete range of flow meters ISOFLUX, intended for flow measurements of conductive, non-conductive liquids, the range includes the following versions:IFX-A – AC mains powered meters (in this product sheet)IFX-B – Battery powered metersIFX-R – MID certified battery water metersUltrasonic flow meters operate on transit time principle by measuring the time difference of ultrasonic waves traveling in and against the direction of the fluid flow. -
Flow Measurement
IFX-B
Read moreUltrasonic flow meter IFX-B ISOFLUXThe ISOFLUX IFX-B ultrasonic flow meter is suitable for applications on clean water and low conductivity liquids.It belongs to a complete range of flow meters ISOFLUX, intended for flow measurements of conductive, non-conductive liquids, the range includes the following versions:IFX-A – AC mains powered metersIFX-B – Battery powered metersIFX-R – MID certified battery water metersUltrasonic flow meters operate on transit time principle by measuring the time difference of ultrasonic waves traveling in and against the direction of the fluid flow. -
Flow Measurement
IFX-F100
Read moreUltrasonic flow meter clamp-on for fixed installation IFX-F100The IFX-F100 clamp-on ultrasonic flow meter for fixed installations, for pipes of various materials and for pipes from DN10 to DN3000.Since clamp-on technology is not intrusive, this is suitable for measuring any fluid regardless of conductivity, pressure or chemical characteristics; the IFX-F100 clamp-on ultrasonic flow meter is equipped with a backlit LCD display and a 5-key keyboard for programming.Through its simple and intuitive menu with installation support function, for quick and easy commissioning, it allows correct positioning of the sensors.The measurement principle is based on transit time with DSP technology for greater precision and offers a bidirectional measurement with totalization function.It has digital or analogue outputs including Modbus, RTU and HART as well as analogue input and input of PT100 temperature sensors thanks to the PT100 temperature inputs the instrument is also able to measure thermal energy.The instrument is also equipped with a large data logger for storing up to 1,000,000 data in 100,000 records. -
Flow Measurement
IFX-P200
Read morePortable Clamp-On Flow Meter IPX-P200The IFX-P200 clamp-on portable ultrasonic flow meter is perfect for short-term flow measurement campaigns.It is suitable for the measurement of any type of fluid, regardless of conductivity, pressure or chemical characteristics or that allows the transmission of the sound wave, as well as on pipes of different materials.The instrument is equipped with a display for showing the instantaneous flow rate and the totalized volume, a large data logger to store up to 1,000,000 data (in 100,000 records) and dedicated software for data management, with a simple and intuitive menu also as an installation support function, for quick and easy commissioning. -
Flow Measurement
IFX-P210
Read morePortable ultrasonic clamp-on flow meter IFX-P210 ISOFLUXThe portable clamp-on flow meter IFX-P210 is available in single or double-string is ideal for a wide range of applications, from water network for leak detection or district in the network, to temporary replacement of inline flow meters, or for industrial applications on corrosive or dangerous fluids.Battery-powered is a quick and easy tool to install with non-invasive snsors with a transit time-based measurement principle.The installation of the sensors is guided by software, for easy identification of the correct location.The IFX-P210 clamp-on range meter can be used on DN10 to DN3000 and DN 50 to DN 3000 with a single pair of sensors. It features a large, integrated logger that stores up to 1,000,000 data and data download software.In addition, the IFX-P210 clamp-on range meter is contained in a robust and sealable IP67 case for measurement and instrument safety.The tool can also be equipped with a wide range of incoming and outgoing signals as well as communication protocols such as the Modbus. -
Flow Measurement
IFX-R
Read moreUltrasonic flow meter IFX-R ISOFLUXThe ISOFLUX IFX-R ultrasonic flow meter is MID MI001 certified for application on drinking water. The instrument is based on the ultrasonic measuring principle with transit time and is available for diameters from 50 mm up to 200mm.It is a double beam version without the use of mirrors or similar, really full bore design, with neglectable pressure drops.The IFX-R meter has an R 500 Q3/Q1 ratio, the capability to be installed in any position, both vertical and horizontal and does not require any straight pipe lengths for installation, as it is U0 / D0 certified.Powered by lithium batteries for a life of more than 10 years of operation, include a powerful integrated data logger and on request can be equipped with pulse outputs or communication via radio with dedicated protocols such as SigFox or Lora.It belongs to a complete range of flow meters ISOFLUX, intended for flow measurements of conductive, non-conductive liquids, the range includes the following versions:IFX-A – AC mains powered metersIFX-B – Battery powered metersIFX-R – MID certified battery water metersUltrasonic flow meters operate on transit time principle by measuring the time difference of ultrasonic waves traveling in and against the direction of the fluid flow. -
Differential Pressure
ISB/1
Read moreEMCO Orifice Plate Series ISB/1 for RF FlangesThe EMCO Orifice Plate is used as a primary element in flow measurement of liquid, gas and steam applications according to the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction in the pipeline to allow measurement of the resulting pressure drop and flow rate. Our orifice plates have been tested and tried for over 50 years and measure up to the highest industry and compliance standards.The Orifice Plate Series ISB/1 is a single bore plate for mounting between raised face flanges. -
Differential Pressure
ISB/1 EP
Read moreEMCO Orifice Plate Series ISB/1 EP for RF FlangesThe EMCO Orifice Plate is used as a primary element in flow measurement of liquid, gas and steam applications based on the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction in the pipeline to allow measurement of the resulting pressure drop and flow rate. Our orifice plates have been tested and tried for over 50 years and measure up to the highest industry and compliance standards.The Orifice Plate Series ISB/1 EP is especially designed for installations with limited space due to the flow conditioning effect created by the 5 hole design. The design therefore combines a traditional single bore orifice plate with a flow conditioner which can reduce the flow meter from 20 times inner pipe diameter to 5 times inner pipe diameter upstream in a straight pipe run. -
Differential Pressure
ISB/2
Read moreEMCO Orifice Plate Series ISB/2 with Integrated Unit for RTJ FlangesThe EMCO Orifice Plate is used as a primary element in flow measurement of liquid, gas and steam applications based on the differential pressure principle. According to this working principle, the orifice plate creates a flow restriction in the pipeline to allow measurement of the resulting pressure drop and flow rate. Our orifice plates have been tested and tried for over 50 years and measure up to the highest industry and compliance standards.The Orifice Plate Series ISB/2 is constructed with a an integrated unit for mounting between ring type joint (RTJ) flanges. -
Flow Transmitter
JUMO multirange and differential pressure transmitter
Read moreJUMO multirange and differential pressure transmitterFor non-aggressive gasesThe product enables differential pressure measurement in non-aggressive gases. Permanent overpressure protects the process from dust penetration. The transmitter is mainly used in cleanrooms. -
Electromagnetic Flow Meter
LDG
Read moreSUP-LDG เครื่องวัดอัตราการไหลแม่เหล็กไฟฟ้าตัวถังเหล็กคาร์บอนมิเตอร์แม่เหล็กไฟฟ้า SUP-LDG เป็นตัวเลือกชั้นนำในการมอบประสิทธิภาพและความแม่นยำในการใช้งานที่คุณต้องการ มิเตอร์เหล่านี้ใช้ได้กับของเหลวที่เป็นสื่อกระแสไฟฟ้าทุกชนิด เช่น น้ำ กรด ด่าง ของเหลวข้น และอื่นๆ อีกมากมาย การใช้งานทั่วไป ได้แก่ การตรวจสอบของเหลว การบรรจุ การจ่าย และการวัดที่แม่นยำในการถ่ายโอนการควบคุม -
Electromagnetic Flow Meter
LDG-A100
Read moreเครื่องวัดอัตราการไหลแบบแม่เหล็กไฟฟ้า LDG-SUP-A100 — การวัดของเหลวที่เป็นตัวนำไฟฟ้าที่มีความแม่นยำสูงเครื่องวัดอัตราการไหลแบบแม่เหล็กไฟฟ้า A100 วัดปริมาตรการไหลของของเหลวที่นำไฟฟ้าได้โดยไม่มีชิ้นส่วนเคลื่อนที่ ให้ข้อมูลที่เชื่อถือได้ในสภาพแวดล้อมทางอุตสาหกรรมที่ต้องการความแม่นยำสูง มีขนาดตั้งแต่ DN15 ถึง DN1000 (DN15 ถึง DN3000 มีให้บริการตามคำขอ) มีปลอกให้เลือกใช้ และวัสดุอิเล็กโทรดให้เลือกหลากหลาย ทำให้ A100 สามารถปรับใช้ได้กับการบำบัดน้ำ การแปรรูปทางเคมี ท่อส่งสารละลาย ระบบปรับอากาศ และระบบชลประทานทางการเกษตรทั่วโลก -
Electromagnetic Flow Meter
LDG-A100D
Read moreLDG-SUP-A100D เครื่องวัดอัตราการไหลแบบแม่เหล็กไฟฟ้าป้องกันการระเบิดเครื่องวัดอัตราการไหลแบบแม่เหล็กไฟฟ้าป้องกันการระเบิดนี้ ใช้หลักการเหนี่ยวนำแม่เหล็กไฟฟ้าของฟาราเดย์ จึงให้การวัดของเหลวที่เป็นตัวนำไฟฟ้าในท่อปิดได้อย่างแม่นยำและเสถียร ด้วยการออกแบบที่กะทัดรัด ไม่ต้องบำรุงรักษา และไม่มีชิ้นส่วนเคลื่อนที่ รองรับเอาต์พุต 4–20 mA, พัลส์ และ RS485 (Modbus RTU) ช่วยให้สามารถวัดแบบสองทิศทาง และเหมาะสำหรับการใช้งานในด้านน้ำ สารเคมี สิ่งแวดล้อม และอุตสาหกรรมอื่นๆ -
Flow Measurement
LM51DN
Read more1/2″ NPT Female AluminumTotalizer LM Series – LUBE METERMain SpecificationsConnection Size: 1/2″Connection Type: NPT FemaleFlow Range: 0.25 – 8 GPM (1 – 30 LPM) @ 5 – 1,000 cpsPressure Rating: 1500 PSI (103.5 Bar)**Operating Temp With Local Computer: -4°F to 140°F (-20° to 60°C) -
Flow Measurement
LZ Series Flanged Connection Industrial Digital Flowmeter with Transmitter
Read moreLZZ metal tube rotameter is a kind of measuring meter which the flow rate is changing along with the area and is widely used in the process control of industrial automation. It has the merit of little volume, broad measuring range and convenience for use. It can used to measure liquid ,gas and vapor flow especially fits for the flow rate measurements of low flow velocity and little flow rate. -
Flow Measurement
LZ Series High Temperature Chemical Sanitary Stainless Water Flow Meter
Read moreLZ series variable-area flowmeter with metallic measuring tube has the characteristics of simplicity, reliability, wide application field, high precision and easy installation. Compared variable-area flowmeter with glass tube flow meter, this series has the characteristics of high pressure safe, high temperature safe, easy reading etc.It is widely applicable in petrol, chemical, power supply, pharmacy, food， water treatment industry etc. -
Flow Measurement
LZ Series Metallic Tube Variable-Area Liquid Horizontal Flowmeter
Read moreThe LZ Series Metallic Tube Variable-Area Liquid Horizontal Flowmeter is an industrial instrument based on the variable-area measurement principle, specifically designed for continuous flow measurement of liquid media. It is widely used in petroleum, chemical, metallurgical, power, pharmaceutical, water treatment, and other process industries. This product is based on the classic float-type variable-area measurement principle. When the liquid being measured enters the flowmeter from the inlet under pipeline pressure, the fluid flows axially along the measuring tube and pushes the float upwards. As the float rises, the annular flow area formed between the float and the inner wall of the conical measuring tube gradually increases until the upward fluid force on the float reaches a dynamic equilibrium with its weight, buoyancy, and resistance. The LZ series features an optimized internal design for float guidance and stability, ensuring that even when gravity is perpendicular to the flow direction, the float maintains good central positioning and smooth movement, thereby reducing friction, vibration, and measurement errors. -
Flow Measurement
LZ Series Threaded Connection Mechanical Indicator Variable Area Flow Meter
Read moreLZ series variable - area flowmeter with metallic measuring tube has the characteristics of simplicity, reliability, wide application field, high precision and easy installation. Compared variable - area flowmeter with glass tube flow meter, this series has the characteristics of high pressure safe, high temperature safe, easy reading etc.It is widely applicable in petrol, chemical, power supply, pharmacy, food, water treatment industry etc. -
Flow Measurement
LZ Series Tri-Clamp Connection Local Display Type Metal Tube Flowmeter
Read moreLZ series variable - area flowmeter with metallic measuring tube has the characteristics of simplicity, reliability, wide application field, high precision and easy installation. Compared variable - area flowmeter with glass tube flow meter, this series has the characteristics of high pressure safe, high temperature safe, easy reading etc.It is widely applicable in petrol, chemical, power supply, pharmacy, food, water treatment industry etc. -
Flow Measurement
LZB- DK800 Mini Gas Stainless Steel Glass Tube Flout Flow Meter
Read moreDK800 series glass rotameter ,The compacted flowmeter is suitable for measuring and regulating small flowrate. Smart design permits convenient replacement Of(tapered glass)tube and flout with the flowmeter staying in the pipe run. It can be connected to either Hoses or metal pipes.
