Transmitter
Transmitter คืออุปกรณ์ที่ใช้แปลงค่าที่วัดได้จากเซ็นเซอร์ให้เป็นสัญญาณมาตรฐาน เช่น 4-20 mA, HART, Modbus หรือ Digital Communication เพื่อส่งข้อมูลไปยัง PLC, DCS, SCADA หรือระบบควบคุมกระบวนการผลิต ช่วยให้สามารถตรวจสอบ ควบคุม และบันทึกค่าต่าง ๆ ได้อย่างแม่นยำ
Showing all 22 results
-
Analytical Instrument
AQUIS 500 Ci
Read moreTransmitter and controller for inductive conductivityThe product controls and acquires the electrolytic conductivity or the concentration. Inductively operating conductivity measuring cells can be connected. The controller is used particularly in media with significant deposits such as oil, fat, or gypsum precipitation. -
Analytical Instrument
AQUIS 500 RS
Read moreIndicating device and controller for digital sensorsThe product controls digital sensors with the Modbus protocol. The voltage supply for the digital sensor is integrated into the device. The graphic display allows input signals to be displayed as digits or as a bar graph. -
Analytical Instrument
AQUIS touch P
Read moreThe product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate. -
Analytical Instrument
AQUIS touch S
Read moreThe product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate. -
Analytical Instrument
digiLine Ci HT10
Read moreCompact design type with inductive sensorMeasuring range: 50 µS/cm to 2000 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine Ci ST10
Read moreMeasuring range: 50 µS/cm to 2000 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine CR HT10
Read moreCompact design type with conductive sensorMeasuring range: 0.1 µS/cm to 100 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine CR HT20
Read moreHead transmitter with conductive two-electrode conductivity sensor type PVCJUMO digiLine CR now enables conductive conductivity sensors to be connected to the intelligent, bus-compatible JUMO digiLine system. System integration can now also take place via an IO-Link interface. The sensor is firmly connected to the head transmitter. -
Analytical Instrument
digiLine CR HT30
Read moreCompact design type with conductive sensorMeasuring range: 0.05 µS/cm to 1 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine CR HT40
Read moreCompact design type with conductive sensorMeasuring range: 0.05 µS/cm to 1 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine CR HT50
Read moreCompact design type with conductive sensorMeasuring range: 0.05 µS/cm to 1 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine CR HT60
Read moreCompact design type with conductive sensorMeasuring range: 10 µS/cm to 15 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine CR HT70
Read moreCompact design type with conductive sensorMeasuring range: 1 µS/cm to 600 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
digiLine CR ST10
Read moreSeparate design type for conductive sensorsMeasuring range: 0.05 µS/cm to 600 mS/cmJUMO digiLine or IO-Link interface -
Analytical Instrument
dTRANS AS 02
Read moreCompact multichannel transmitters and controllers for standard signalsJUMOThe product controls and records standard signals and temperatures. It can be used as a two-state, three-state, three-step, or as a continuous controller. Among other things the controller software includes parameter block switching and a math module. -
Analytical Instrument
dTRANS CR 02
Read moreCompact multichannel transmitters and controllers for conductivityThe product controls and records the electrolytic conductivity, the specific electrical resistivity, or the TDS value. Both conductive two-electrode and four-electrode measuring cells can be connected as well as a pulse generator for flow measurement. -
Analytical Instrument
dTRANS pH 02
Read moreCompact multichannel transmitter and controllerThe product controls and records the pH and redox values, ammonia concentrations, temperatures, and flow rates. It can be used as a two-state, three-state, three-step, or as a continuous controller (e.g. for detoxifications). -
Analytical Instrument
ecoTRANS Lf 03
Read moreTransmitter and switching device for conductivityThe product measures the conductivity or the resistance of liquids in conjunction with conductive conductivity measuring cells. Typical application areas are plants for fresh water monitoring and water treatment, reverse osmosis plants, etc. -
Analytical Instrument
ecoTRANS pH 03
Read moreTransmitter and switching device for pH, redox, and temperatureDepending on its configuration, the device measures and controls the pH value or the redox potential in aqueous solutions. Typical application areas include general water and wastewater management, the measuring of drinking water and wastewater, process water, surface water, and seawater. -
Analytical Instrument
JUMO AQUIS 500 CR
Read moreTransmitter and controller for conductivityThe product controls the electrolytic conductivity, the specific electrical resistivity, or the TDS value. Conductive two-electrode measuring cells as well as four-electrode measuring cells can be connected to the device.
