- Meter Body Size: 4″
- Local/Remote Display: Local
- Display Type: Digital LCD (GRN Housing)
- Flow Meter Type: OM Series – OVAL GEAR
- Std Calibration Reports Included: Yes
- Warranty Period: 1 Year
- Product Type: Rate, Totals & 4-20mA Output
- Benefits & Features: Excellent for applications with fluctuating or multiple viscosities – No field calibrating required; Accuracy: ± 0.5% Of Reading; Up to 1,000 cps Viscosity; No straight pipe requirements; Bi-directional; PPS Rotors are immune to galling (adhesive wear); PPS Rotors produce less noise than metal rotors; 6 Digit Display – Floating Decimal; Rate of Flow; Batch & Cumulative Totals; Choice of Gallons or Liters; Custom Programmable Display (including UOM); Back-lighted Display when powered externally
- Max Pressure Drop (at Max Flow in test conditions): Contact us
- Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5% (±0.2% Opt’l) @ 3cp
- Repeatability (based on test conditions): ± 0.03%
- Maximum Viscosity: 1,000 cps
- Recommended Strainer Size: 45 Mesh (350 Microns)
- Max. Particle Size: .014″ / .354 mm
- Operating Temp Without Local Computer or With Remote Computer: 5 to 250°F (-15 to 120°C) [Opt’l]
- Applications (always check Chemical Compatibility Guide): Metering clean fluids such as Oils, Grease, Fuels, Fuel Oils, Lubricating LiquidsNot Suitable For Applications: Water, dirty liquids
- Minimum Straight Pipe Dia.s: None
- Desired Straight Pipe Dia.s: None
- Application Notes: The meter may be mounted horizontally or vertically but must be mounted, so the rotor shafts are in a horizontal plane (see manual), For viscous liquids, the maximum allowable flow may need to be reduced to ensure the pressure drop across the meter does NOT exceed 15 PSI, Viscosities <3cps, min. flow range is 10% of the maximum flow range, Line must be full (no air) for proper accuracy
ต้องการใบเสนอราคา
