The OPTIMASS 7010 is a high-end single straight tube Coriolis mass flowmeter. It is particularly suitable for demanding process and dosing applications involving gases and shear-sensitive or viscous liquids, slurries, very aggressive media or media with a low flow velocity. The Coriolis meter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.
The OPTIMASS 7010 is available in four sensor materials (titanium, stainless steel, Hastelloy®, tantalum). Due to its sensor design, there is virtually no pressure loss and the flowmeter is self-draining and easy to clean, which makes it also the perfect choice for hygienic applications. The Coriolis device is also approved for use in hazardous areas.
- Single straight tube design
- No separate converter needed: Communication direct from meter
- Integrated temperature measurement
- Available in four sensor materials: titanium, stainless steel, Hastelloy® C or tantalum
- With sensor size DN80 / 3″ in titanium or Hastelloy® it is the largest single straight tube meter on the market
- Optional PED approved secondary pressure containment up to 100 barg / 1450 psig
- Virtually no pressure loss, easy to drain and clean
- Many options (heat tracing, purge port etc.)
- Immunity to crosstalk: resistant to installation and process effects
General information
| Product type | Flowmeter |
| Product family name | OPTIMASS |
| Product positioning | For advanced applications and process control |
| Measurement principle | Coriolis |
| Measured media | Liquids, Gases |
Operating conditions
| Process pressure | max. 100 barg/ 1450 psig |
| Process temperature | -40…+150°C/ -40…+302°F |
Materials
| Measuring tube | Austenitic alloy (2.4602/Alloy 22), Duplex stainless steel (1.4462/318), Titanium alloy (3.7195/Ti-Grade 9), Tantalum (UNS RO5255 / RO5200) |
Process connections
| Flange connections | EN (1092-1): DN10…100 ASME (B 16.5): ½…4″ JIS (B 2220): 10…100A |
| Hygienic connections | Clamp (DIN 32676): DN10, DN15, DN25, DN40, DN50, DN80 Clamp (ISO 2852): 25, 40, 51, 76.1 Tri-Clamp: ½”, ¾”, 1″, 1½”, 2″, 3″ Threaded ferrule (DIN 11851): DN10, DN15, DN25, DN40, DN50, DN80 Flange with groove (DIN 11864-2): DN10, DN15, DN25, DN40, DN50, DN80 Threaded ferrule (SMS 1146): 25 mm, 38 mm, 51 mm, 76 mm IDF/ISS: 10A, 15A, 1″, 1½”, 2″, 3 |
Approvals/Standards
| Certificates/Approvals Ex | ATEX, IECEx, EAC Ex, INMETRO, FM |
| Certificates/Approvals Hygienic | FDA, 3A, EHEDG, EC 1935/2004 |
| Certificates/Approvals Marine | ABS, BV, CCS, DNV, KR, LR, NK, RINA, CRS, IRS, PRS, RS |
Communication
| Digital outputs | Modbus RTU |
General
- Very aggressive, highly corrosive or shear-sensitive media
- Products requiring a low flow velocity
- Non-homogeneous mixtures
- Slurries or products with entrained solids
- Applications where a PLC or DCS is already used for other functions
Chemical and other process industries
- Measurement of concentration, density
- Bulk loading
- Batching to reactors
- Acids, bases, phosgene and other chloride substances, sulphuric substances
Food and beverage industry
- Batching dosing, filling
- Measurement of flow, density, specific gravity in brewing processes
- Dosing of hop extract
- Milk reception, dosing and separation processes in dairies
- Measurement of Brix, density and flow in fruit juices
- Oily and greasy products
- Liquid chocolate, honey, marmalade, syrup etc.
- CO2 injection
- Whisky, wine, vodka etc.
Pharmaceutical industry
- Batching, dosing, filling
- Solvent extraction
Oil and gas industry
- Metering skids, bulk and tanker loading, pipeline transfer, in-line density
Pulp and paper industry
- Paperstock, pulp
- Coating kitchens
Water and wastewater industry
- Flocculant dosing
- Sludge flow and density measurement
ต้องการใบเสนอราคา
