The OPTIMASS 1010 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of universal and hygienic applications with liquids and gases (up to 170,000 kg/h or 6,235 lb/min and +130°C / +266°F). It features an integrated Modbus converter. This makes the flowmeter an ideal solution where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.
The OPTIMASS 1010 features an optimised flow splitter for minimum pressure loss and can be drained and cleaned easily. Next to standard flange process connections, the flowmeter supports a wide range of standard hygienic connections for food and beverage applications. It is also suitable for use in hazardous areas.
- Twin straight tube design
- No separate converter needed: Communication direct from meter
- Optimised flow splitter for low pressure loss
- Integrated temperature measurement
- Optional PED approved secondary pressure containment up to 100 barg / 1450 psig
- Best-in-class price/performance ratio
- Optional heating jacket or purge ports
- Immunity to crosstalk: resistant to installation and process effects
General information
| Product type | Flowmeter |
| Product family name | OPTIMASS |
| Product positioning | For universal applications and process control |
| Product variants | |
| Measurement principle | Coriolis |
| Measured media | Liquids, Gases |
Operating conditions
| Process pressure | max. 100 barg/ 1450 psig |
| Process temperature | -40…+130°C/ -40…+266°F |
Materials
| Measuring tube | Duplex stainless steel (1.4462/318) |
Process connections
| Flange connections | EN (1092-1): DN15…100 ASME (B 16.5): ½…4″ JIS (B 2220): 15…80A |
| Hygienic connections | Clamp (DIN 32676): DN25, DN40, DN50, DN80 Clamp (ISO 2852): 25, 40, 51, 76.1 Tri-Clamp: 1″, 1½”, 2″, 3″ Threaded ferrule (DIN 11851): DN25, DN40, DN50, DN80 Flange with groove (DIN 11864-2): DN25, DN40, DN50, DN80; Threaded ferrule (SMS 1146): 25 mm, 38 mm, 51 mm, 76 mm |
Approvals/Standards
| Certificates/Approvals Ex | ATEX, IECEx, EAC Ex, INMETRO, FM |
| Certificates/Approvals Hygienic | FDA, 3A, EHEDG, EC 1935/2004 |
| Certificates/Approvals Marine | ABS, BV, CCS, DNV, KR, LR, NK, RINA, CRS, IRS, PRS, RS |
Communication
| Digital outputs | Modbus RTU |
General
- Standard process applications up to +130°°C / +266°F
- Applications where a PLC or DCS is already used for other functions
- Portable installations on trucks, rail tankers, portable rigs etc.
Food and beverage industry
- Measurement of flow, density, specific gravity in brewing processes
- Flow measurement of beverages and fruit juices
- Dosing of additive food components
Pharmaceutical industry
- Batching, dosing, filling
- Solvent extraction
- Ultrapure water ring-main measurement
Chemical and other process industries
- Bulk loading
- Batching to reactors
Marine industry
- Fuel consumption measurement
Pulp and paper industry
- Batching and dosing of additives, bleaches and colourants
Water and wastewater industry
- Flocculant dosing
ต้องการใบเสนอราคา
